王罡:清華大學機械工程學院副研究員-中文百科頻道

人物經曆

學習經曆

1994.09-1998.06，清華大學，學士

1998.09-1999.06，清華大學，碩士

1999.09-2004.06，清華大學，博士

工作經曆

2004.09-2007.04，ESI中國有限公司，高級工程師

2007.06-2010.07，美國伍斯特理工學院機械工程系，研究學者

2010.11-至今，清華大學機械工程系，副研究員

主要成就

科研成就

科研綜述

發表SCI論文35篇，美國金屬學會《金屬材料手冊》ASM Handbook邀請撰稿1章，授權美國發明專利1項，中國發明專利9項。

論文

[1]Yisen Hu, Gang Wang, Yanzhou Ji, Liping Wang, Yiming Rong, Long-Qing Chen, Study of θ’ precipitation behavior in Al-Cu-Cd alloys by phase-field modeling, Materials Science & Engineering A, 746 (2019) 105–114

[2]Shaopeng Wei, Gang Wang, Yung C. Shin, Yiming Rong, Comprehensive modeling of transport phenomena in laser hot-wire deposition process, International Journal of Heat and Mass Transfer, 2018,125(10),1356-1368

[3]Yisen Hu, Gang Wang, Mao Ye, Shuqing Wang, Liping Wang, Yiming Rong, A precipitation hardening model for Al-Cu-Cd alloys, Materials and Design , 151 (2018) 123–132

[4]Shaopeng Wei, Gang Wang, Liping Wang, Yiming Rong, Characteristics of microstructure and stresses and their effects on interfacial fracture behavior for laser-deposited maraging steel, Materials and Design, Vol. 137 (2018), 56–67

[5]Hu, Y., Wang, G., Wang, W. et al, Effect of Precipitation During Quenching on the Prediction of the Mechanical Properties of Al-5 Pct Cu Alloy After T6 Treatment, Metall and Mat Trans A, November 2017, Volume 48, Issue 11, 5667–5677

[6]Shaopeng Wei, Gang Wang, Jianchao Yu, Yiming Rong, Competitive failure analysis on tensile fracture of laser-deposited material for martensitic stainless steel, Materials and Design, 118 (2017) 1–10

[7]Wenguang Wang, Gang Wang, Yisen Hu, Guannan Guo, Tingting Zhou, Yiming Rong, Temperature-dependent constitutive behavior with consideration of microstructure evolution for as-quenched Al-Cu-Mn alloy, Materials Science & Engineering A, Vol. 678 (2016) 85–92

[8]Zhenguo Nie, Gang Wang, Jianchao Yu, Dehao Liu, Yiming (Kevin) Rong, Phase-based constitutive modeling and experimental study for dynamic mechanical behavior of martensitic stainless steel under high strain rate in a thermal cycle, Mechanics of Materials, Vol.101 (2016) Page 160–169

[9]Zhenguo Nie, Gang Wang, Yongliang Lin, and Yiming (Kevin) Rong, Experimental Study and Modeling of H13 Steel Deposition Using Laser Hot-Wire Additive Manufacturing, Journal of Materials Processing Technology, Vol.235, September 2016, 171–186

[10]Tao Yu, Dewei Deng, Gang Wang, Hongchao Zhang, Crack healing in SUS304 stainless steel by electropulsing treatment, Journal of Cleaner Production, Vol.113, February 2016, 989–994